The Detrum GAVIN-6C is a 2.4GHz 6-channel remote controller for RC airplanes, helicopters and multirotors, and is a low-power device with a long battery life. It supports four joystick modes, a trainer mode and a failsafe function for increased safety, and can be continuously updated via a USB upgrade program. In addition, the remote controller uses DSSS and FHSS dual spread spectrum technology, which has good signal stability and anti-interference capabilities even in urban areas.
The SR86A is an 8-channel 2.4GHz receiver with a built-in 6-axis gyro for conventional wing, flying wing, V-tail and 3D aircraft. It offers four flight modes: gyro off, normal flight, aerobatic flight and auto recovery, and supports easy programming through compatible remote controllers. It uses a 32-bit processor, DSSS/FHSS technology and dual antennas, with stable signals, strong anti-interference ability, and automatic fail-safe function. In addition, the ID code of each remote controller can be stored in the receiver, and there is no need to re-bind after restarting the receiver.
Packing List：Detrum GAVIN-6C transmitter x1，Detrum SR86A Sport Receiver x1，Introduction Manual x1
Specifications
GAVIN-6C transmitter
| Channel |
6-channel |
| Transmitting frequency |
2.4GHz |
| Spread spectrum |
DSSS&FHSS |
| Power supply |
AA batteries 4*1.5V, Ni-MH batteries 4*1.2V, 2S Li-Po |
| Consuming current |
less than or equal to 120mA (test mode); less than or equal to 230mA (Operating mode). |
| Output power |
10mW (test mode); 100mW (Operating mode). |
| Output pulse |
1000ms~2000ms (neutral 1500ms) |
SR86A sport receiver
| Channel |
8-channel |
| Sensor |
6-axis gyro |
| Sensitivity |
-97dBm |
| Output |
PWM (71Hz) |
| Transmission Range |
more than 1km on the ground and more than 1.6km in the air. |
| Input Voltage |
3.6V~16V |
| Size |
51mm*28.4mm*14.5mm |
| Weight |
15g |
