Dynam Piper Super Cub 1270mm 3S/4S STOL RC Bush Beginner Plane

Dynam Piper Super Cub 1270mm STOL RC Airplane – Beginner Friendly Bush Plane

The Piper Super Cub is a classic American light aircraft, first introduced in the 1940s. The Super Cub is an excellent performance aircraft, with a high-wing design, a lightweight fuselage, and excellent short take-off and landing (STOL) capabilities. In addition, it is popular for bush flying, training and leisure flying, especially because of its excellent performance on rough or short runways, and has been a favorite of pilots for decades.

The Dynam Super Cub is a scale replica of the legendary Piper Super Cub, built for short takeoff and landing (STOL) performance. With a 1270mm wingspan and EPO foam construction, this RC bush plane is durable, easy to assemble, and perfect for beginners.
Powered by a pre-installed Detrum BM3715-KV890 brushless motor and Skylord 40A ESC, it supports both 3S and 4S 14.8V 2200mAh Li-Po 25C battery LiPo batteries. It features functional flaps, ball-link pushrods, 6 digital metal-gear servos, and a detachable wing for easy transport. The landing gear uses rubber foam wheels for smooth operation on grass, dirt, or pavement.

• STOL Design
  Smooth rubber foam wheels landing gear and functional flaps enable short takeoffs/landings realistic bush operations on grass, dirt, or pavement.

• Beginner-Friendly Easy Assembly
  Wing Assembly: Quick-release wings secured by 4 thumb screws + 6 metal r-shape clevis pins.

• Glue-free horizontal/vertical stabilizer: Carbon-reinforced stabilizers screw into place.

• Magnetic-secured canopy/battery hatch and bottom cover offers quick access to electronics.

• Durable Construction
  The internally reinforced fuselage can easily perform rolling, tumbling and other flight stunts.
  Pre-installed carbon spars in wing set & horizontal/vertical stabilizer enhance rigidity.
  Ball-link pushrods ensure precise control surface response.

• Powerful System
  Detrum BM3715-KV890 brushless motor + TomCat Skylord-40A ESC (5A BEC) handles 3S/4S lipos.
  Pre-painted white tips 10x6 2-balde propeller.
  Spacious battery compartment with clean cable routing.

• 6x 9g metal-gear servos (digital IC) for quiet, accurate movement.
  Rear-mounted servos reduce force impact, extending component life.

• Pre-applied waterslide decals and scale paint finish.

Rear Stearing Wheel Installation:

Features

Durable and lightweight EPO construction
Aileron, flaps, rudder, and elevator controls
Tomcat Skylord 40A ESC 5A-BEC
The attractive yellow paint scheme.
Scale pilot for added detail
Powerful Detrum BM3715-890KV brushless outrunner motor
GAVIN 6CH 2.4GHz radio system
Detrum MSR66A 6CH 2.4Ghz Mini Receiver iStone 6-Axis Gyro Stabilizer w/ ABS System
3S/4S 14.8V 2200mAh Li-Po 25C battery
Pre-installed waterslide decal
Ball-link connector
Smooth rubber foam wheel
Suitable for all levels
The main wing is detachable and easy to carry.

Specifications

Wingspan: 1270mm (50in)
Overall Length: 891mm (35in)
Flying Weight: 1280g (45.15oz) - with 3S 2200mAh Lipo
Wing Loading: 64.7g/dm²
CG (Center of Gravity): 65-70mm from the leading edge of the wing at the root
Power System: Detrum BM3715-890KV brushless outrunner motor - (pre-installed)
Electronic Speed Control: TomCat Skylord-40A ESC 5A-BEC - (pre-installed)
Propeller: 2-blade propeller 10*6 - DYP-1023
Servo: 6x 9g new digital IC servos - (pre-installed)
Landing Gear: Fixed w/ rubber wheel
Required Transmitter: GAVIN-6A 2.4Ghz 6-Channel or above (required)
Required Receiver: MSR66A 6CH 2.4Ghz Stabilizer (required)
Required Battery: 3S/4S 14.8V 2200mAh Li-Po 25C (required)
Aileron: Yes
Elevator: Yes
Rudder: Yes
Flaps: Yes
Approx. Flying Time: 15 minutes
Material: EPO Foam
Skill Level: Beginner
Assembly Time: 1 hour
Age Level: 14+
Recommended Environment: Outdoor
Aircraft Type: STOL

What's the difference between RTF, BNF, SPNP and PNP?

PNP (Plug-N-Play) RC airplanes have everything you need EXCEPT a transmitter, receiver, and battery pack (battery & charger). It contains model kits, Detrum motors, TomCat Skylord ESCs, and servos.

BNF (Bind-N-Fly) RC airplanes come with everything you need to get in the air EXCEPT the Transmitter and battery pack (battery & charger). It contains model kits, Detrum motors, TomCat Skylord ESCs, servos, and an iStone gyro receiver. They are easy to use, versatile, and safe, making them the perfect choice for beginners and experienced pilots. The BNF (Bind and Fly) version, receivers such as the MSR66A work exclusively with Detrum transmitters.

Dynam SPNP (PNP + iStone All V2) RC airplane is a versatile and user-friendly aircraft designed for RC enthusiasts. Combining an easy plug-and-play setup with the advanced iStone stabilization system, it suits a wide range of pilots. The PNP + iStone version includes the iStoneAll V2 6-axis gyro stabilizer, compatible with major radio transmitter brands like Futaba, Spektrum, Detrum, and etc., providing excellent versatility and flight performance.

iStone All V2 Gyro Stabilizer Features:

6-axis high-precision stabilization
Auto-recovery and one-click rescue
Compatible with most receivers
Adjustable parameters and sensitivity via 3-in-1 programming card with LCD
Gyro-off mode for manual flight

The PNP configuration and iStone All V2 stabilization system make this plane ideal for beginners, while offering features appreciated by intermediate pilots.

Dynam SRTF version is based on the standard RTF (Ready to Fly), which integrates the iStone 6-Axis Gyro Stabilizer w/ ABS System: RC airplanes get everything in a box to fly. The radio system (Transmitter and receiver), battery pack (battery and charger), and all other required electric parts are included and pre-installed. It contains model kits, Detrum motors, TomCat Skylord ESCs, servos, Detrum transmitters, iStone gyro receivers, battery, charger, and adapter. RTF planes are a great way to enjoy the thrill of flying without too much hassle.

SRTF-6A Version: Includes a PNP kit, Detrum motors, TomCat Skylord ESCs, servos, Gavin-6A transmitter, MSR66A iStone gyro receiver, battery, charger, and adapter.

SRTF-8C Version: Features a PNP kit, Detrum motors, TomCat Skylord ESCs, servos, Gavin-8C transmitter, MSR66A iStone gyro receiver, battery, charger, and adapter.

SRTF-DT9 Version: Comes with a PNP kit, Detrum motors, TomCat Skylord ESCs, servos, Blitz-DT9 transmitter (programming & telemetry), SR86A-G 8-channel gyro receiver, battery, charger, and adapter.